Amariei, G., Henriksen, M. L., Friis, J. B.
, Pedersen, P. K. & Hinge, M. (2023).
In-line identification of Pb-based pigments in fishing nets and ropes based on hyperspectral imaging and machine learning.
Marine Pollution Bulletin,
191, Artikel 114910.
https://doi.org/10.1016/j.marpolbul.2023.114910
Pedersen, S. S., Batista, G. M. F., Henriksen, M. L., Hammershøj, H. C. D., Hopmann, K. H.
& Skrydstrup, T. (2023).
Lignocellulose Conversion via Catalytic Transformations Yields Methoxyterephthalic Acid Directly from Sawdust.
JACS Au,
3(4), 1221–1229.
https://doi.org/10.1021/jacsau.3c00092
Rohr Thomsen, C., Leonhard, A. K., Strandbo Schmidt Jensen, M., Bor, P., Hinge, M., Uldbjerg, N. & Sandager, P. (2023).
Quantitative strain elastography of the uterine cervix assessed by the GE Voluson E10 system in combination with a force-measuring device.
Journal of Maternal-Fetal and Neonatal Medicine,
36(1), Artikel 2213797.
https://doi.org/10.1080/14767058.2023.2213797
Thomsen, C. R., Jensen, M. S. S., Leonhard, A. K., Mortensen, T. Ø., Bor, P., Sandager, P., Hinge, M. & Uldbjerg, N. (2022).
A force-measuring device combined with ultrasound-based elastography for assessment of the uterine cervix.
Acta Obstetricia et Gynecologica Scandinavica,
101(2), 241-247.
https://doi.org/10.1111/aogs.14309
Hansen-Bruhn, I., Poulsen, A. V., Abildgaard, U., Ravnsbæk, J. B.
& Hinge, M. (2022).
Effect of titania, barite, and kaolinite fillers on char layer formation in water-based intumescent fire-retardant coatings.
Journal of Coatings Technology and Research,
19(4), 1067-1075.
https://doi.org/10.1007/s11998-021-00585-8
Hansen-Felby, M., Sommerfeldt, A., Henriksen, M. L., Pedersen, S. U. & Daasbjerg, K. (2022).
Synthesis and depolymerization of self-immolative poly(disulfide)s with saturated aliphatic backbones.
Polymer Chemistry,
13(1), 85-90.
https://doi.org/10.1039/d1py01412a
Heide-Jørgensen, S., Budzik, M. K., Buhl, K. B., Hinge, M., Pedersen, S. U., Daasbjerg, K. & Kongsfelt, M. (2021).
Mode I debonding under large deformation conditions including notes on cleavage-peeling transition.
Engineering Fracture Mechanics,
241, Artikel 107413.
https://doi.org/10.1016/j.engfracmech.2020.107413
Mohamed, N. A., Hinge, M., Larsen, O. H., Sørensen, U. B. S., Uldbjerg, N. & Nejsum, L. N. (2021).
Streptococcus agalactiae do not penetrate human chorioamniotic membranes in vitro but alter their biomechanical properties.
Acta Obstetricia et Gynecologica Scandinavica,
100(10), 1814-1821.
https://doi.org/10.1111/aogs.14232
Andersen, E., Bertelsen, L. H., Salomonsen, M., Kristensen, M., Kybelund, P., Sørensen, M. B.
& Hinge, M. (2020).
Accelerating effect of pigments on poly(acrylonitrile butadiene styrene) degradation.
Polymer Degradation and Stability,
178, Artikel 109183.
https://doi.org/10.1016/j.polymdegradstab.2020.109183
Nielsen, S. D., Koren, K., Löbmann, K.
, Hinge, M., Scoma, A., Kjeldsen, K. U. & Røy, H. (2020).
Constraints on CaCO3 precipitation in superabsorbent polymer by aerobic bacteria.
Applied Microbiology and Biotechnology,
104(1), 365-375.
https://doi.org/10.1007/s00253-019-10215-4
Buhl, K. B., Agergaard, A. H., Møller, R., Kongsfelt, M.
, Heide-Jørgensen, S., Budzik, M. K., Hinge, M., Pedersen, S. U. & Daasbjerg, K. (2020).
Facile Access to Disulfide/Thiol Containing Poly(glycidyl methacrylate) Brushes as Potential Rubber Adhesive Layers.
ACS Applied Polymer Materials,
2(6), 2380-2388.
https://doi.org/10.1021/acsapm.0c00306
Pal, S., Sommerfeldt, A., Davidsen, M. B., Hinge, M., Pedersen, S. U. & Daasbjerg, K. (2020).
Synthesis and Closed-Loop Recycling of Self-Immolative Poly(dithiothreitol).
Macromolecules,
53(12), 4685-4691.
https://doi.org/10.1021/acs.macromol.0c00861
Andersen, E., Mikkelsen, R., Kristiansen, S.
& Hinge, M. (2019).
Accelerated physical ageing of poly(1,4-cyclohexylenedimethylene-co-2,2,4,4-tetramethyl-1,3-cyclobutanediol terephthalate).
RSC Advances,
9(25), 14209-14219.
https://doi.org/10.1039/c9ra00925f
Clausen, C., Dražević, E., Andersen, A. S., Henriksen, M., Hinge, M. & Bentien, A. (2018).
Anthraquinone Oligomers as Anode-Active Material in Rechargeable Nickel/Oligomer Batteries with Aqueous Electrolyte.
ACS Applied Energy Materials,
1(2), 243-248.
https://doi.org/10.1021/acsaem.7b00009
Heide-Jørgensen, S., Møller, R., Buhl, K. B., Pedersen, S. U., Daasbjerg, K., Hinge, M. & Budzik, M. K. (2018).
Efficient bonding of ethylene-propylene-diene M-class rubber to stainless steel using polymer brushes as a nanoscale adhesive.
International Journal of Adhesion and Adhesives,
87, 31-41.
https://doi.org/10.1016/j.ijadhadh.2018.09.006
Budzik, M. K., Heide-Jørgensen, S., Møller, R., Buhl, K. B., Pedersen, S. U., Daasbjerg, K. & Hinge, M. (2018).
Fracture toughness of rubber/stainless steel bonding using nanothick adhesive. Abstract fra 12th European Adhesion Conference and 4th Luso-Brazilian conference on Adhesion and Adhesives, Lissabon, Portugal.
Buhl, K. B., Møller, R., Heide-Jørgensen, S., Kolding , A. N., Kongsfelt, M. S., Budzik, M. K., Hinge, M., Pedersen, S. U. & Daasbjerg, K. (2018).
Highly Efficient Rubber-to-Stainless Steel Bonding by Nanometer-Thin Cross-linked Polymer Brushes.
ACS Omega,
3(12), 17511–17519.
https://doi.org/10.1021/acsomega.8b02312
Dražević, E., Andersen, A. S., Wedege, K., Henriksen, M., Hinge, M. & Bentien, A. (2018).
Investigation of low-cost oligoanthraquinones for alkaline, aqueous rechargeable batteries with cell potential up to 1.13 V.
Journal of Power Sources,
381, 94-100.
https://doi.org/10.1016/j.jpowsour.2018.01.092
Røjkjær, R.
, Andersen, E., Heide-Jørgensen, S., Ciallella, C., Mikkelsen, R., Kristiansen, S.
& Hinge, M. (2018, sep. 24).
Straight forward approach for obtaining relaxation-recovery data. Open Science Framework.
https://doi.org/10.17605/OSF.IO/S6UPA
Henriksen, M. L., Ravnsbæk, J. B., Bjerring, M., Vosegaard, T., Daasbjerg, K. & Hinge, M. (2017).
Epoxy Matrices Modified by Green Additives for Recyclable Materials.
ChemSusChem (Print),
10(14), 2936-2944.
https://doi.org/10.1002/cssc.201700712
Jensen, A. C. S., Brif, A., Pokroy, B.
, Hinge, M. & Birkedal, H. (2016).
Morphology-preserving transformation of minerals mediated by a temperature-responsive polymer membrane: Calcite to hydroxyapatite.
CrystEngComm,
18(13), 2289-2293.
https://doi.org/10.1039/c5ce02245b
Haldrup, S., Catalano, J., Hinge, M., Jensen, G. V., Pedersen, J. S. & Bentien, A. (2016).
Tailoring Membrane Nanostructure and Charge Density for High Electrokinetic Energy Conversion Efficiency.
ACS Nano,
10(2), 2415-2423.
https://doi.org/10.1021/acsnano.5b07229
Brandt, R. G., Yue, W., Andersen, T. R., Larsen-Olsen, T. T.
, Hinge, M., Bundgaard, E., Krebs, F. C. & Yu, D. (2015).
An isoindigo containing donor–acceptor polymer: synthesis and photovoltaic properties of all-solution-processed ITO- and vacuum-free large area roll-coated single junction and tandem solar cells.
Journal of Materials Chemistry C,
3, 1633-1639.
https://doi.org/10.1039/C4TC02877E
Haldrup, S., Kilsgaard, B. S., Catalano, J., Hinge, M. & Bentien, A. (2015).
Electrokinetic energy conversion in charged nitrocellulose membranes. Abstract fra 8th International Membrane Science & Technology Conference, Melbourne, Australien.
http://www.conference.net.au/imstec/papers/28734.pdf
Städe, L. W., Nielsen, T. T., Duroux, L.
, Hinge, M., Shimizu, K., Gurevich, L., Kristensen, P. K., Wingren, C. & Larsen, K. L. (2015).
Nonfouling Tunable βCD Dextran Polymer Films for Protein Applications.
A C S Applied Materials and Interfaces,
7(7), 4160-4168.
https://doi.org/10.1021/am508350r
Shimizu, K., Malmos, K., Spiegelhauer, S. A., Hinke, J.
, Holm, A. H., Pedersen, S. U., Daasbjerg, K. & Hinge, M. (2014).
Durability of PEEK adhesive to stainless steel modified with aryldiazonium salts.
International Journal of Adhesion and Adhesives,
51, 1-12.
https://doi.org/10.1016/j.ijadhadh.2014.02.002
Christiansen, N., Todorov, P., Shimizu, K.
, Budzik, M. K., Hinge, M. & Jensen, H. M. (2014).
Evaluation of fracture energy using J-integral in a polymer brush coated steel and polymer interface. Poster session præsenteret på 5th World Congress on Adhesion and Related Phenomena, Nara, Japan.
Shimizu, K., Malmos, K., Holm, A. H., Pedersen, S. U., Daasbjerg, K. & Hinge, M. (2014).
Improved adhesion between PMMA and stainless steel modified with PMMA brushes.
A C S Applied Materials and Interfaces,
6(23), 21308-21315.
https://doi.org/10.1021/am5062823