Department of Biological and Chemical Engineering

Aarhus University Seal
 Department of Biological and Chemical Engineering Research Key areas in research & development Molecular and Cellular Biotechnology Research Groups Biomechanics and Mechanobiology Publications

Publications

Sort by: Date | Author | Title

Foldager, C., Bendtsen, M., Nygaard, J. V., Zou, X. & Bünger, C. (2009). Differences in Early Osteogenesis and Bone Micro-architecture in Anterior Lumbar Interbody Fusion with rhBMP-2, Equine Bone Protein Extract, and Autograft. Bone, 45, 267-273.
Bjerre, L. & Nygaard, J. V. (2009). Kroppen skal bygge nye knogler. Politiken Weekly, 1.
Nygaard, J. V., Samuel, S. A., Kim, W. Y. & Besenbacher, F. (2009). Method for calculating pressures in a fluid stream through a tube section, especially a blood vessel with atherosclerotic plaque. (Patent No. PCT/Dk2008/050266).
Nygaard, J. V., Andersen, M. Ø., Cloetens, P., Foss, M., Kassem, M., Kjems, J. & Besenbacher, F. (2009). Polycaprolactone nanomesh cultured with hMSC evaluated by synchrotron tomography. Poster session presented at Self-assembly: from nature to clinics, Porto, Portugal.
Nygaard, J. V., Bjerre, L., Bünger, C. & Besenbacher, F. (2009). Structurally Graded Scaffolds.
Bünger, C., Besenbacher, F., Bjerre, L. & Nygaard, J. V. (2009). Three-dimentional Nanostructured Hybrid Scaffold and Manufacture Thereof.
Niemann, A., Samuel, S. A., Fründ, E.-T. W., Nygaard, J. V., Petersen, S. E. & Hasenkam, J. M. (2008). Assessment of Hemodynamic Conditions in A-V Shunts using CFD. Poster session presented at PhD Day, University of Aarhus, Århus, Denmark.
Samuel, S. A. & Nygaard, J. V. (2008). Carotid Plaque Stresses. In G. Petrone & G. Cammarata (Eds.), Modelling and Simulation (1. ed. ed., pp. 167-184). I-Tech Education and Publishing.
Nygaard, J. V., Samuel, S. A., Kim, W. Y. & Besenbacher, F. (2008). Computer Aided Biological Response Assessment, CABRA applied to Atherosclerosis. Poster session presented at iNANO 6th annual meeting, Aarhus, Denmark.
Nygaard, J. V., Andersen, M. Ø., Howard, K. A., Foss, M., Bünger, C., Kjems, J. & Besenbacher, F. (2008). Investigation of particle-functionalized tissue engineering scaffolds using X-ray tomographic microscopy. Biotechnology and Bioengineering (Print), 100(4), 820-9. https://doi.org/10.1002/bit.21796
Kock, S. A., Nygaard, J. V., Eldrup, N., Fründ, E.-T., Klærke, A., Paaske, W. P., Falk, E. & Yong Kim, W. (2008). Mechanical stresses in carotid plaques using MRI-based fluid-structure interaction models. Journal of Biomechanics, 41(8), 1651-1658. https://doi.org/10.1016/j.jbiomech.2008.03.019
Nygaard, J. V., Foss, M., Cloetens, P., Kassem, M. & Besenbacher, F. (2008). Nanomesh evolved in polycaprolactone shown by synchrotron holo-tomography. Poster session presented at 8th World Biomaterials Congress, Amsterdam, Belgium.
Nygaard, J. V., Andersen, M. Ø., Cloetens, P., Foss, M., Kassem, M., Kjems, J. & Besenbacher, F. (2008). Nanoscaffolds for Drug Delivery and Tissue Engineering. Poster session presented at iNANO 6th annual meeting, Aarhus, Denmark.
Samuel, S. A., Nygaard, J. V., Niemann, A., Klærke, A., Paaske, W., Falk, E. & Kim, W. Y. (2008). The Effect of Lipid Core Placement on Fibrous Cap Stress Levels. Poster session presented at 18th Annual Meeting of the Scandinavian Society for Research in Cardiothoracic Surgery, Geilo, Norway.
Samuel, S. A., Nygaard, J. V., Niemann, A., Klærke, A., Paaske, W., Falk, E. & Kim, W. Y. (2008). The Effect of Lipid Core Placement on Fibrous Cap Stress Levels. Poster session presented at ISMRM, Toronto, Canada.
Samuel, S. A. & Nygaard, J. V. (2007). Patient risk assessment using computational methods in medicine. In iNANO Annual Report 2007 (pp. 32-33).
Nygaard, J. V. & Lyckegaard, A. (2007). Sandwich beam with a periodical and graded core manufactured using rapid prototyping. Journal of Sandwich Structures and Materials, 9(4), 365-376. https://doi.org/10.1177/1099636207071609
Nygaard, J. V. & Lyckegaard, A. (2007). Sandwich Panel with a periodical and graded core manufactured using rapid prototyping. Journal of Sandwich Structures & Materials, 9(4), 365-376.
Andersen, M. Ø., Nygaard, J. V., Howard, K., Bak, R. O., Paludan, S. R., Raarup, M. K., Besenbacher, F. & Kjems, J. (2007). Surface delivery of siRNA for implants. European Cells & Materials, 14(3), 118.
Samuel, S. A., Fründ, T., Kim, W. Y. & Nygaard, J. V. (2006). Stresses in Carotid Plaques using MRI-based Fluid Structure Interaction Models. In L. Gregersen (Ed.), Nordic Comsol Conference 2006 Copenhagen (1 ed., Vol. 1). Comsol A/S.
Nygaard, J. V., Bregnant, L., Mygind, T., Bünger, C. & Besenbacher, F. (2006). Tortuosity Flow Parameter in Scaffolds from Synchrotron Tomography. Poster session presented at Biology and Medicine with Low Energy Synchrotron Radiation, Institute for Storage Ring Facilities (ISA) at Aarhus University, Aarhus, Denmark.
Nygaard, J. V. (2005). Femlab Analysis of Open Aluminium Foam in Compression. In Proceedings of the COMSOL Multiphysics User's Conference 2005
Kjems, J., Bünger, C., Nygaard, J. V. & Mygind, T. (2005). Making implants last a lifetime. In iNANO Annual Report 2005 (pp. 14-15).
Nygaard, J. V. & Pyz, R. (2005). Morphology of a Closed Cell Polyethylene Sandwich Core and its Tape Interphase: STVF rammeprogram I: Structurally Graded Polymeric Materials and Filled Polymers, Task C: Micromechanics and microstructure property correlations.
Nygaard, J. V., Andersen, M. Ø., Howard, K., Sasov, A., Kjems, J. & Besenbacher, F. (2004). Analysis of Nanoparticles in Scaffolds for Tissue Engineering by use of X-Ray Nano Tomography. Poster session presented at iNANO 4th annual meeting, Aarhus, Denmark.
Nygaard, J. V. & Pyrz, R. (2003). Characterisation of Microcellular Foams using X-Ray Microtomography and Raman Spectroscopy. Cellular Polymers, 22(6), 347-369.
Pyrz, R. & Nygaard, J. V. (2003). In-situ delamination studies using X-ray microtomography. In D. Bruno (Ed.), Proceedings of International Conference on Composites in Construction--CCC2003 (pp. 189)
Nygaard, J. V. (2003). Mechanical characterisation of microcellular thermoplastic foams manufactured using gas diffusion technique. Aalborg Universitetsbibliotek.
Pyrz, R. & Nygaard, J. V. (2002). In-situ delamination studies using X-ray microtomography. In Design Engineering (pp. 625-629). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2002-33466
Nygaard, J. V. & Rytter, J. (1999). A reinforced, flexible conduit and a method of manufacturing same.

Displaying results 101 to 130 out of 130

Previous

1

2

3

Revised 20.03.2026
-
Jens Vinge Nygaard